Are you looking for ways to save on your home heating costs? If so, then one of the best things you can do is to schedule furnace maintenance in Nashville . When it comes to this topic, many people wrongly assume that turning their heat off when they’re not home is a smart strategy for saving on energy costs. Instead, when you shut the heat off completely, the system is forced to work harder to warm your home later, which can end up resulting in higher, not lower, energy bills. For this reason, instead of turning off the heater when you leave for the day, you should set your thermostat down a few degrees lower than you normally have it.
The same rule applies when you leave your home for a few days or more. Again, you don’t want to let the house get too cold so that the heater won’t have to work too hard once you return. Lastly, if the temperatures will be dropping near freezing in your area, then turning off your heater may cause some of your pipes to freeze and burst, which is a problem that no homeowner wants to come home to.
Arranging for regular heater maintenance instead of waiting until your furnace has a problem is one of the best ways to avoid being left in the cold. If you’re scheduled for seasonal heating maintenance in Nashville , then keep reading to learn what you can expect during this service.
Evaluation and Tune-Up
After arriving at your home, the HVAC professional will begin the furnace maintenance process by evaluating several parts of the system. He will check to ensure that the unit’s temperature and pressure readings are correct, its amp draw is within specifications, and the vent system and air intake are free of blockages. He will also check for signs of wear or damage on the belts, heat exchanger, and electrical components. The inspection will also involve checking for tight seals, assessing and cleaning the blower, and ensuring that the burner and flame sensor are working properly.
Testing and Cleaning
To help extend the lifespan of the heater by preventing friction, your HVAC technician will lubricate each of the system’s moving parts during seasonal heating maintenance. Also, all of the unit’s electrical components will be checked for tight connections, and the furnace will be turned on to evaluate its function. Other tasks that will be completed include testing the safety controls, thermostat calibration, and startup cycle. Also, the heating and cooling technician will check the filter for cleanliness, ensure that the condensate drain is clog-free, and clean the condenser fins. If you have a gas furnace, then your HVAC professional will take a few extra steps as part of your seasonal heating maintenance, such as checking the gas connections, gas pressure, and ignition function.
Benefits and Recommendations
Some of the benefits of scheduling regular seasonal maintenance for your heating system include more reliable and efficient furnace function, as well as a longer lifespan and fewer repair needs for the unit. Once the maintenance is complete, your HVAC technician will provide you with a report that outlines what steps were completed and any recommendations for maintenance and repairs.
During the sweltering dog days of summer, Tennessee residents like to stay close to their air conditioned homes. But it’s frustrating when an air conditioner suddenly fails, even if the AC repair company in Nashville offers emergency service. Getting your unit regularly serviced will help prevent untimely summertime meltdowns. It’s also a smart idea to know the warning signs that an AC repair is needed in between your usual maintenance appointments.
Your home’s temperature is consistently higher than the thermostat.
One warning sign of imminent failure is a significant, consistent gap between the thermostat and the actual temperature. If you find yourself constantly turning the thermostat down farther, but your home isn’t getting any cooler, it’s time to call the air conditioning repair service. Another warning sign is if the temperature in your home fluctuates from room to room.
Your AC unit is making alarming noises.
It’s perfectly normal to hear a low humming noise when the AC is running in the summer. But if you detect unusual noises, you should schedule an air conditioning repair appointment promptly, before the unit completely fails. Sometimes, a difference in the noise may be subtle, such as a different type or volume of humming. In other cases, the noise might be alarming, such as a loud clanking or grinding noise.
Your AC unit is emitting unusual odors.
Has your family been complaining of unusual odors around the house lately? After ruling out the obvious causes, like a garbage can that needs to be emptied, consider taking a whiff of the air near a vent. An AC that has been emitting foul odors is definitely a cause for alarm. It’s possible that the odor is due to accumulated mold and mildew, but it might also indicate that the unit is going to fail soon.
Your electricity bill is much higher than usual.
If there’s something wrong with your AC unit, it may have to work harder to cool your home. You’ll notice the difference when it’s time to pay the electricity bill. Invest in a service appointment with the repair company, and you can look forward to a lower utility bill next month.
=Regular heating and air conditioning maintenance is a key component of enjoying indoor comfort year-round and preventing the need for costly repairs. If you’re looking for a smart way to keep up with AC maintenance near Nashville, then look no further than One Hour Heating & Air Conditioning’s Comfort Club.
Comfort Club is a no-hassle air conditioning maintenance program that makes caring for your HVAC unit simple. As a Comfort Club member, you’ll enjoy several benefits, such as discounts on repairs and parts, as well as priority service. For AC maintenance, Comfort Club membership provides you with a precision tune-up, safety check, and professional cleaning once per year, typically in the spring or summer. For your furnace, you’ll receive the same services annually, but in the fall or winter.
Becoming a Comfort Club member gives you an easy way to invest in your HVAC unit. Neglect is one of the most common causes of heating and air conditioning breakdowns, and your busy schedule can make it difficult to remember to schedule a tune-up. Consider joining Comfort Club today to simplify your HVAC maintenance needs and save on repair costs.
During the cooler months, many people rely heavily on the function of their home’s heating system. Are you in the market for a replacement heater in Nashville because yours is no longer worth repairing? If so, then be sure to keep the following factors in mind as you weigh your options:
When it comes to new central heating installation, there are 2 different kinds of systems to consider. The first, called a split system, is what most people think of when it comes to heaters, and the indoor portion of a split system is typically housed in a basement, attic, or crawlspace. If your home lacks the indoor space for split system heating equipment, then you may be better off choosing a packaged unit. A packaged heating system contains all the equipment in a single, outdoor unit. Also, if you currently have a split system but want to free up space in your home, then going with packaged unit heater installation could be a smart choice.
Most heaters use gas, oil, propane, or electricity for fuel. When the temperatures dip below freezing, gas heaters offer the most economical way to warm your home. Oil and propane are also effective in cold weather, but they can be less environmentally friendly and more expensive to operate. If you choose an electric replacement heater, this can be convenient but less economical. However, electric heat pump installation can offer you better energy efficiency by pulling heat from the air or ground to heat your home in winter and collecting it from your indoor air to cool it in summer.
Installing a heater that is the right size for your house is important for ensuring its efficiency and proper function. Have an HVAC contractor visit your home and provide you with an estimate for what size replacement heater you need. A heater that is the right size for your home can enjoy a long lifespan and help provide you with optimal comfort.
When you need heater repair , the unit may be heating your home unevenly, inefficiently, inadequately, or not at all. If you’re like many people, then you rely heavily on your heater once cold weather arrives. For this reason, taking care of furnace repairs when needed and hiring an expert to do the job is important. If you think that you may need heating repair near Nashville, then there are several reasons why you should leave this task to a professional.
Many factors contribute to how well your heater functions, and they can influence the amount that you pay on your energy bills and how comfortable you feel in your home. Most heating systems use gas or oil burning systems to function, and these can be safety hazards when not handled properly. Also, HVAC systems can be confusing for anyone who isn’t a professional and trying to fix problems when you don’t know what you are doing can be time-consuming or cause more harm than good. To be sure that the job is done right, call a professional if you need heater repair services.
Are you tired of paying for heating repair for your old heating system, or is your heating system nearing the end of its expected lifespan? If so, you should consider installing a new heating system in your home. One Hour Heating & Air Conditioning can show you the different heating systems in Nashville and talk to you about your options.
There are many different heating systems you can install in your home. For example, heat pumps can both heat and cool your home by transferring heat, while furnaces and boilers can keep your home comfortable when it gets particularly cold outside. We can take a look at your home and let you know which heating system we believe is best for you. A new system will allow you to put high heating repair bills in the past and provide you with much higher energy efficiency. If you choose One Hour Heating & Air Conditioning, we will gladly use our experience and knowledge to set you up with the right system for your home.
After deciding to purchase a new heating system near Nashville , you can choose between a variety of types of heaters. An HVAC system technician can help you determine which type of heating system will be right for your home. This may depend upon the size of your home, what type of fuel you prefer for your heating system, what your regional climate is, and how often you plan on using your heating system.
The two types of heating systems that are most common in residential homes are forced-air heaters, or radiant heaters. Forced-air heating systems use a central furnace installation and a heat pump and blower to distribute heat through ductwork and air vents. Forced-air heating systems often have lower furnace installation, furnace maintenance, and furnace repair costs due to the fact that they have fewer moving parts in the heating system.
Radiant heating systems consist of a central boiler service, water heater, or heat pump to transport steam or hot water throughout the heating system. Heat is provided to rooms via radiators or radiant floor heating systems. Radiant heating systems are quieter, but heating services, installation, and furnace repairs are higher.
- Air Conditioner
- Air Duct Cleaning
- HVAC Maintenance
- About Us
- Heating Installation
- AC Maintenance
- Indoor Air Quality
- AC Repair
- Mike Rowe
- Maintenance Club
- Emergency Service
- Comfort Club
- Air Conditioning
- furnace maintenance
- air conditioning installation
- air conditioning services
- New HVAC System
- HVAC company
- air conditioning repairs
- heating system
- furnace installation
- HVAC repair
- air conditioning systems
- repairs and maintenance
- air conditioning service
- Air Conditioning Service Company
- SEER Ratings
- furnace repairs
- Blue Collar Labor Myths